Back to Blog
How-to Guides 2026-11-16 Over the Brick 0 views

How to Use Terrain Crate Fences and Hedges on the Battlefield

How to Use Terrain Crate Fences and Hedges on the Battlefield

Put the 12-piece Terrain Crate Battlefield Fences & Hedges set to work: plan a modular layout, base the hedges, and paint the fences without losing playability.

Start with the box, then decide what each piece does

The Terrain Crate Battlefield Fences & Hedges set gives you 12 pieces of plastic scenery to furnish a tabletop battlefield. The catalog describes them as cast in high quality plastic, preassembled, and ready to play straight out of the box, though the same record also lists them as supplied unassembled and unpainted. Treat that as a prompt to check the pieces before your first game: if any parts are loose, a little assembly may be needed, and painting is left to you.

Before you glue anything down or commit to a permanent layout, sort the 12 pieces into roles. Some will work as long linear barriers, others as short corner fillers, and hedges can break line of sight in a way a fence does not. The exact mix of fences and hedges is not specified in the supplied information, so count and group by shape rather than assuming a fixed ratio.

What the set gives you

  • Terrain Crate: Battlefield Fences & Hedges: 12 pieces of plastic scenery, cast in high quality plastic and described as preassembled and ready to play straight out of the box, but also supplied unassembled and unpainted. The piece count sets how much table you can cover, and the assembly and paint status tells you what prep to expect before the first game.
    Terrain Crate: Battlefield Fences & Hedges
    Terrain Crate: Battlefield Fences & Hedges

A modular fence terrain setup you can repeat

The goal is a layout you can set up quickly and change between games. Work in this order so you are not repainting or rebasing pieces you have already committed.

  1. Lay out all 12 pieces on the bare table: Try a long run, a broken line, and a corner enclosure. Note which pieces meet cleanly and which leave gaps. This is the cheapest way to find a layout that suits your board before any glue or paint.
  2. Assign roles: long barriers, short fillers, hedge blocks: Use longer pieces to divide the table into lanes and shorter pieces to close gaps or protect a flank. Hedges are the pieces most likely to block sight lines, so place them where that matters to your scenario.
  3. Test the layout with models on the table: Walk a few units through the gaps and check that the fence line does not make movement awkward. The supplied information does not give recommended gap widths or base sizes, so judge this against your own models.
  4. Photograph or sketch the layout you like: A quick phone photo saves you from rebuilding the same arrangement from memory. Keep two or three variations so the table does not look identical every game.

How to base wargaming hedges for stability and looks

Basing is optional, but it is the step that stops hedges from sliding and makes them look like part of the table rather than loose toys. The supplied record does not include base sizes, materials, or manufacturer basing instructions, so the following is general hobby practice, not a product requirement.

Work on one hedge piece at a time. Attach it to a base that is slightly smaller than the hedge footprint so the base does not read as a visible plinth, then texture and paint the base to match your table. Keep the base thin enough that models can stand next to the hedge without wobbling. If you plan to use the hedges on more than one board, a neutral brown or green base travels better than a highly specific theme.

Painting Terrain Crate fences without overworking them

Because the set is supplied unpainted, the fence pieces are a blank surface. The supplied information does not confirm a primer type or paint compatibility, so test any primer on an inconspicuous part of one piece first. A simple sequence works well for scatter terrain: prime, block in the main wood or stone color, add a darker wash in the recesses, then drybrush a lighter tone on the raised edges. Keep the palette muted so the fences support your models instead of competing with them.

Paint the hedges separately from the fences. A dark green base with a lighter green drybrush reads as foliage at table distance, and a brown base coat on the fence posts gives the wood a grounded look. You do not need to paint every piece to the same standard: pieces that sit at the table edge can be simpler than the ones in the center. The catalog does not list a paint range or color guide, so choose colors that match your existing terrain.

Battlefield scatter terrain ideas for 12 pieces

Twelve pieces is enough for a small themed set or a flexible scatter kit. These are starting points, not rules.

  • Roadside run: Line several fence pieces along one edge of a road or path to create a boundary that models can cross but that breaks up open ground.
  • Corner enclosure: Use fences on two sides and hedges on the other two to make a small defended pocket. This gives you a compact objective area without a building.
  • Broken line: Leave deliberate gaps between pieces so units can filter through. A broken fence line looks less artificial than a perfect wall and plays faster.
  • Hedge screen: Group the hedge pieces into one longer screen to block sight lines across a fire lane. Keep the fences for the flanks.
  • Mixed scatter: Spread individual pieces around the table as small obstacles rather than building one big line. This suits dense boards where a full wall would choke movement.

Where the supplied information stops

The product record confirms the piece count, material, and assembly and paint status, but it does not give dimensions, a piece-by-piece breakdown, recommended base sizes, or a paint guide. It also does not include care, safety, or compatibility instructions. That means any specific measurement or product-to-product compatibility claim in this article would be a guess. Use the steps above as a framework, then check the physical pieces against your own table and models before you glue, base, or paint them permanently.

Related Articles

Customer Service
Home
Products
Cart
Profile